Crew installing seamless aluminum gutters on a Twin Cities home in spring

Gutters

Top Gutter Contractors in the Twin Cities (Minneapolis-St Paul) - 2026 Guide

3/17/2026 Minneapolis • St Paul • Twin Cities Suburbs

Practical guide to established Twin Cities gutter contractors for 2026, covering seamless installation, gutter guards, east metro specialists, and what a replacement costs in Minneapolis-St Paul.

Last updated: March 2026

Minnesota roofs shed water fast — and in Minneapolis–St Paul, that water has to go somewhere. Heavy rain, rapid snowmelt, and repeated freeze–thaw cycles push large volumes of runoff around foundations in short windows of time. Without well-designed gutters and downspouts, that water saturates soils, contributes to basement leaks, heaves driveways, and damages siding. In this climate, gutters are structural protection, not an aesthetic upgrade.

Most Twin Cities homeowners pay between $1,000 and $4,000 for a full gutter replacement, depending on linear footage, material, and whether guards are included. That range matters less than it sounds — poorly managed runoff can cost $5,000–$15,000+ in basement waterproofing or foundation repair down the road. The right gutter system pays for itself.

This guide covers the strongest gutter contractors in the metro by scenario — so you can narrow your shortlist before the first phone call.


Signs It’s Time to Replace Your Gutters

Not sure whether you need new gutters or just a repair? These are replacement signals, not repair signals — if you’re seeing one or two items, get an estimate. If you’re seeing three or more, replacement is almost certainly the right call.

The fascia is the flat board running along the roofline directly behind the gutter — that’s the reference point for several of these:

  • Gutters pulling away from the fascia or visibly sagging along the run
  • Cracks, holes, or rust spots affecting more than one section
  • Water pooling at the foundation or staining on basement walls after rain
  • Paint peeling or wood rot on the fascia boards directly behind the gutters
  • Gutters overflowing during moderate rain — not just during heavy storms
  • Multiple seam separations on a sectional gutter system
  • The system is more than 20 years old and showing widespread wear

A single crack or loose spike is usually worth repairing. When problems are spread across the system, replacement is typically the better investment. See the FAQ below for a more detailed repair-vs-replace breakdown.


Do Twin Cities Homes Need Seamless Gutters?

Yes — and here’s why it matters for a Minnesota home specifically.

Seamless gutters are custom-formed on-site to the exact length of each run, which minimizes joints. Joints are the primary failure point in any gutter system, and in Minnesota’s freeze-thaw climate, they’re where sectional gutters most often crack, separate, and leak. Seamless systems don’t eliminate all maintenance, but they handle the repeated expansion and contraction of a Minnesota winter significantly better than sectional alternatives.

Sectional gutters can work on small runs like detached garages, but for a full residential install in the Twin Cities, every contractor on this list — and most reputable gutter specialists in the metro — specializes in seamless systems for exactly these reasons.

If replacement is on the table, here’s where to start.


Gutter Contractor Shortlist by Scenario (Twin Cities – 2026)

Contractors were verified across Google, Angi, HomeAdvisor, Birdeye, BBB records, and independent editorial roundups. Priority went to companies with consistent multi-platform review records, gutters as a core service, and proven Twin Cities coverage. No company paid to be included.

These groupings are meant to narrow an initial shortlist before requesting detailed bids.


Long Track Record + Metro-Wide Coverage

Tonka Seamless Gutters — Hopkins, MN

Operating since 1980 and BBB-accredited since 1981, Tonka Seamless Gutters is one of the longest-running gutter specialists in the metro. With roughly 45 years of gutter-focused experience and an Angi rating around 4.8 out of 5 from hundreds of homeowner reviews, Tonka serves the complete Twin Cities metro area — Minneapolis, St Paul, and surrounding suburbs. Residential gutters and downspouts are their core business, supplemented by leaf-protection products and soffit/fascia work. Free estimates offered.

Best fit: Homeowners who want a proven, gutter-only specialist with decades of local track record. Less ideal for: Projects requiring integrated roofing or siding coordination under one crew.


Gutter-Only Specialization + Lifetime Warranty

Minnesota Leafless Gutters — St Paul / Mendota Heights area

Minnesota Leafless Gutters focuses almost exclusively on gutters and downspouts and has served the Twin Cities metro for nearly two decades. BBB-listed as a leafless gutter company, they offer a lifetime transferable warranty on both materials and labor — uncommon in the gutter industry, where 5–10 year warranties are more typical. Birdeye reports an average rating around 4.6 stars across verified customer reviews, with consistent feedback on installation quality and service follow-through. Free estimates offered.

Best fit: Homeowners who want a gutter-only specialist with strong long-term warranty backing. Less ideal for: Combined exterior projects requiring a single contractor across multiple trades.


Gutters Integrated with Roofing or Siding

Sela Gutter Connection — Brooklyn Center, MN

Sela Gutter Connection is the gutter-focused arm of the long-running Sela Roofing and Remodeling brand — BBB-accredited with an A+ rating and roughly 27 years in the gutter business. Their ability to coordinate gutters with roofing and siding under one project manager makes them a strong choice when multiple exterior systems need to be addressed together. Independent profiles aggregate their rating at approximately 4.6 stars across more than 100 homeowner reviews, with strong marks for professionalism and cleanup. Serves suburbs across Hennepin, Ramsey, and surrounding counties. Free estimates offered.

Best fit: Homeowners replacing or repairing gutters as part of a broader roofing or siding project. Less ideal for: Standalone gutter-only jobs where multi-trade coordination adds cost without benefit.


High Review Scores + Broad Seamless Capabilities

Mid-State Seamless Gutters — Brooklyn Park, MN

Mid-State Seamless Gutters is a BBB-accredited gutter specialist with roughly 18 years in business, an Angi rating around 4.9 out of 5, and well over 200 reviews across platforms. They handle residential and commercial seamless aluminum gutters, copper gutters, downspouts, gutter covers, leaf protection, and gutter cleaning across the full Twin Cities metro. HomeAdvisor and Angi consistently flag them as a top-rated gutter installer in multiple Twin Cities markets. Free estimates offered.

Best fit: Homeowners who want a highly reviewed gutter specialist with strong seamless and guard capabilities. Less ideal for: Projects requiring integration with roofing or siding under one crew.


Owner-Operated + East Metro + St Croix Valley

Seamless Gutter Solutions — Oakdale, MN

Founded in 1997 by Dan Freiermuth, a former St Paul police officer, Seamless Gutter Solutions is a locally owned, owner-operated gutter company with 28+ years of Twin Cities experience. Based in Oakdale, SGS serves the east metro — including Oakdale, Woodbury, Lake Elmo, and Maplewood — as well as the broader Twin Cities metro and the St Croix Valley region of Western Wisconsin. Core services include seamless gutter installation, gutter repair, gutter protection systems, and downspout and drainage extensions. SGS operates on a no-money-down, pay-on-completion model and backs its work with a Lifetime Satisfaction Guarantee. Free estimates offered.

Best fit: Homeowners in the east metro who want owner-supervised workmanship, direct communication with the founder, and a strong satisfaction guarantee. Less ideal for: Homeowners in the far western suburbs — confirm service availability for your specific city before scheduling.


5-Star Review Profile + Responsive Owner-Driven Service

Call The Gutter Guys — Rockford, MN

Call The Gutter Guys is a locally owned seamless gutter company based in Rockford, commonly serving communities including Rockford, Delano, St Michael, Maple Grove, and Minneapolis and the surrounding western and northwestern suburbs. Their installers average around 20 years of experience, and they handle seamless gutter installation, gutter guards, cleaning, and roof heat cables. On Birdeye, they carry a 5.0-star rating from 113 verified customer reviews — reviewers consistently cite strong communication, tidy job sites, and responsive problem-solving. Free estimates offered.

Best fit: Homeowners in the western and northwestern suburbs looking for an owner-operated specialist with exceptional review scores. Less ideal for: Projects requiring integrated roofing or siding work under one contractor.


Comparison Snapshot (2026)

CompanyTypical Scenario StrengthPrimary Service AreaGood For
Tonka Seamless GuttersLong track record, metro-wide coverageFull Twin Cities metroReputation-focused homeowners
Minnesota Leafless GuttersGutter specialization + lifetime warrantyFull Twin Cities metroLong-term warranty priority
Sela Gutter ConnectionMulti-trade integrationHennepin, Ramsey + surrounding countiesCombined exterior projects
Mid-State Seamless GuttersHigh review scores, broad capabilitiesFull Twin Cities metroStrong review priority
Seamless Gutter SolutionsEast metro, owner-operatedEast metro (Oakdale, Woodbury, Lake Elmo, Maplewood) + St Croix Valley, WIEast metro / owner-supervised
Call The Gutter Guys5-star owner-driven serviceRockford, Delano, St Michael, Maple Grove, Minneapolis + western suburbsWest/northwest suburbs

What Gutters Cost in Minneapolis–St Paul (2026)

Full gutter replacement for a typical Twin Cities home generally runs between $1,000 and $4,000+, depending on:

  • Linear footage — most homes fall between 100 and 200 linear feet
  • Gutter size — 6-inch systems cost more but move significantly more water
  • Material — aluminum is standard; steel and copper run higher
  • Guard type — micro-mesh systems add cost but reduce long-term maintenance

Line-item comparison matters. Two bids for the same linear footage can differ by hundreds of dollars based on gutter sizing, guard selection, downspout placement, and drainage extensions. The cheapest bid isn’t always the most efficient — a contractor who right-sizes the system for your roofline will often save money on future cleanings and repairs.

For context, basement waterproofing runs $5,000–$15,000+ and foundation crack repair can exceed that. A properly installed gutter system at $2,000 is straightforward prevention.

Red flags to watch for when comparing quotes: Be cautious of any contractor who can’t provide a written, itemized estimate; requests a deposit of more than 10–15% upfront; is unwilling to put warranty terms in writing; or pressures you to sign the same day. These patterns appear across the industry and are worth filtering for before you get far into the process.


Gutter Sizing for Minnesota Homes

Standard residential gutters come in two primary sizes: 5-inch and 6-inch K-style systems. Six-inch gutters move roughly 40% more water than 5-inch systems and are increasingly recommended for Minnesota homes with:

  • Steep roof pitches
  • Long, uninterrupted roof runs
  • Significant tree coverage that adds debris load
  • Any history of overflow during heavy rain or rapid snowmelt

A practical rule of thumb: If your roof pitch is steep, your runs are longer than 40 feet, or you’ve had overflow problems in the past, ask specifically about 6-inch systems. Not all contractors default to the larger size even when it’s the right call — so ask the question directly on every estimate.

The visual difference is subtle from the street — 6-inch gutters are slightly deeper and wider but use the same profiles and come in the same colors as 5-inch systems. You’ll notice the difference most in how they handle a heavy rain.


What a Twin Cities Gutter Estimate Should Include

Bring this list to every estimate. A solid bid will address all of it:

  • Linear footage and gutter size — total feet and whether 5-inch or 6-inch is recommended, and why
  • Materials and color — aluminum, steel, or copper; specific gauge and color match
  • Downspout count and placement — number, size, locations, and any extensions carrying water 3+ feet from the foundation
  • Gutter guards or leaf protection — type, brand, and impact on cleaning frequency and warranty coverage
  • Labor, cleanup, and disposal — who removes old gutters; site protection; projected timeline
  • Warranty terms — written workmanship and product warranties, clearly separated
  • Payment schedule — deposit amount (if any), final payment timing, accepted methods

If a contractor can’t answer any of these at the estimate stage, that’s useful information.


What to Expect on Installation Day

For most Twin Cities homes, a full gutter replacement takes one day — often four to six hours for a typical residential job. Here’s what the process generally looks like:

Morning: The crew removes your existing gutters and inspects the fascia boards for rot or damage. If they find anything significant, a good contractor tells you before proceeding and gives you a cost to repair it. Fascia rot is common on older Minnesota homes, particularly on north-facing sides that hold moisture longer — if your home is more than 20 years old, it’s worth budgeting an additional $50–$150 per section in case repairs are needed.

Midday: New gutters are formed on-site using a portable roll-forming machine mounted in the truck — this is what makes them seamless. Sections are cut to the exact length of each run and installed with hangers spaced to handle snow load.

Afternoon: Downspouts are cut, fitted, and secured. Extensions or underground drainage connections are added if included in the scope. The crew sweeps the perimeter and removes old materials.

You don’t need to be home for most of the work, but being available by phone is helpful in case the crew finds fascia damage or has a question about downspout routing. A final walkthrough when they’re done takes ten minutes and is worth doing.

Weather and scheduling: Most gutter installations can proceed in light rain — the gutters are being replaced, not painted. Heavy rain, high winds, or snow typically requires rescheduling, which a good contractor will confirm with you the day before.


How Often Should Gutters Be Cleaned in Minneapolis–St Paul?

In the Twin Cities, the late-October to mid-November window is the most critical cleaning of the year — after peak leaf drop but before the first hard freeze, when clogged downspouts are most likely to contribute to ice dam formation. Missing that window is a common cause of ice dam problems that homeowners later blame on their roof.

For most Twin Cities homes, twice-yearly cleaning is the baseline — late spring and late fall. Of the two, fall is the one that matters most in this climate. Homes with heavy tree coverage often benefit from three or four cleanings per year.

Gutter guards reduce cleaning frequency but don’t eliminate it — even well-installed micro-mesh systems benefit from periodic professional inspection, particularly on complex roofs or heavily wooded lots.


Next Steps

Use the scenario sections above to narrow your shortlist, then request estimates from two or three companies that match your project type and location.

Spring is the busiest season for gutter contractors in the Twin Cities. If you’re planning a spring installation, getting estimates in March or April typically means better scheduling flexibility — crews in the metro typically book 4–6 weeks out by late May.

For a broader comparison across Minneapolis, St Paul, and surrounding suburbs, explore the full Twin Cities gutter contractor directory. East metro homeowners can also browse gutter contractors by city: Oakdale, Woodbury, Lake Elmo, and Maplewood.


This guide reflects publicly available information as of March 2026. Always verify current licensing, insurance, and recent reviews before hiring any contractor.

FAQs

How much do gutters cost in Minneapolis-St Paul?
Full gutter replacement for a typical Twin Cities home generally runs between $1,000 and $4,000+, depending on linear footage, material (aluminum, steel, or copper), gutter size, and whether leaf guards are included. Six-inch systems and copper gutters sit at the higher end of that range. The widest variable is often guard type - a quality micro-mesh system can add $500-$1,500 to the total but meaningfully reduces long-term maintenance.
Do I need seamless gutters for a Minnesota home?
Yes, for any full residential installation. Seamless gutters minimize joints - the primary failure point in cold climates where freeze-thaw expansion is pronounced. Most established Twin Cities gutter contractors specialize in seamless systems for exactly this reason.
What size gutters should I get - 5-inch or 6-inch?
Six-inch K-style gutters move roughly 40% more water than 5-inch systems and are often the better choice for Minnesota homes with steep pitches, long roof runs, or any history of overflow. Ask your contractor to justify their sizing recommendation based on your specific roof geometry - not all default to the larger size even when it's appropriate.
How often should I clean gutters in Minneapolis?
Twice a year is the baseline - late spring and late fall. The late-October to mid-November cleaning is the most important: clearing debris before the first hard freeze prevents the downspout clogs that contribute to ice dams. Homes with heavy tree coverage often need three to four cleanings per year.
What's the difference between gutter guards and leaf protection systems?
Both reduce cleaning frequency, but they vary significantly in design and cold-weather performance. Screen guards are inexpensive but clog with fine debris and can ice over. Micro-mesh systems filter smaller particles and handle freeze-thaw better, but cost more. Reverse-curve systems rely on water adhesion and work inconsistently in heavy debris and ice conditions. For a Minnesota home, micro-mesh from a contractor who warranties both the product and the installation is the most reliable choice.
How do I know if my gutters need to be replaced or just repaired?
Minor, isolated issues - a single cracked section, a loose spike, one separated seam - are usually worth repairing if the rest of the system is in good shape. Replacement makes more sense when gutters are pulling away from the fascia along multiple runs, when seam failures keep recurring on a sectional system, or when the gutters are more than 20 years old with widespread wear. When you're unsure, get two opinions. A gutter-only specialist is less likely to recommend full replacement on a repairable system than a general contractor for whom gutters are a secondary service.
Are gutter guards worth it in Minnesota?
For most Twin Cities homeowners, quality gutter guards are a worthwhile investment - particularly micro-mesh systems that keep debris out while allowing snowmelt to flow freely. They won't eliminate maintenance entirely, but they meaningfully reduce cleaning frequency and help prevent the late-fall clogs that contribute to ice dams. The caveat: cheap screen or reverse-curve guards often underperform in heavy debris and hard-freeze conditions. If you're investing in guards, buy a mid-to-high quality system from a contractor who warranties both the product and the installation.

What to do next

Use this guide to prep questions for contractors, then compare companies by city or service type. If you need immediate help with storm damage, jump to the contractor directory and call crews already working in your area.

Related guides

View all posts